Electronics

Attaches Dash to steer tube beneath top cap. Great for mountain bikes and setups with minimal handlebar space. - Mounts to the top cap of a bike by replacing a headset spacer - Angle can be controlled by loosening and tightening the pivot bolt - For Stages Dash L10, L50, and M50 - Fits all 1-1/8" headsets with room for a spacer over the stem

This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle

Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status

Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status

The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

Accurate, reliable power measurement is practically a requirement these days, and the Apex AXS crankarm power meter upgrade is the easiest way to get precise power numbers. With the tech hidden inside the DUB spindle, it fits almost any bike while remaining stealthy. - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset)

It looks like it’s from the future, but it’s here now. Our lightest, stiffest, and most accurate integrated power meter and chainring combo is now on Force. Quarq D-Zero technology is accurate to +/-1.5% and isn’t affected by temperature changes, and the consistent 13-tooth gap on the rings ensures fast and reliable shifting. Not just unbeatable on performance, our integrated rings are also incredibly long-lasting. And let’s not be modest: the combination of these rings on our iridescent carbon crank arm is the best looking thing out there. FEATURES - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability and simplicity

It’s the ultimate in integrated power measurement. The Force AXS power meter kit adds Quarq technology to our one-piece chainrings for the lightest, stiffest, and most accurate power package available. A 13-tooth delta on all chainring pairs ensures precise shifting for any setup, as well as a less dramatic change in cadence during front shifts. Combined with our most durable chainrings ever, it’s an unbeatable combination. FEATURES - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - Crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable unit

Power measurement is a crucial part of training, so we’ve made it as easy as possible to upgrade your Force AXS ride with Quarq technology. DUB-PWR takes the legendary reliability and accuracy of Quarq technology and inserts it into the crank spindle for clean integration that fits more bikes than ever. It’s invisible technology that adds minimal weight and will help you get to the finish line faster. FEATURES - DUB-PWR spindle-based unit measures left side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User replaceable AAA lithium battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset)

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - BB not included

The X0 Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle provides riders with accurate, live power data delivery housed in our most advanced aluminum crankset. The power meter technology is integrated through what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery with robustness in mind. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - Unique, groundbreaking design integrated with one of the lightest aluminum cranksets on the market - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

The XX Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle utilizes SRAM's World stage proven XX crank arm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit. We achieve this by utilizing what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery giving you an edge over the competition. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

The XX SL Eagle AXS Transmission Power Meter Crankset combines the XX SL crank arm with an integrated power meter. All-new spider design uses a proprietary chainring mount system which reduces weight without compromising reliability. Dual sided power measurement calculates total watts. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS enabled components. - Compatible with Flight Attendant. +/- 1.5% accuracy. - User replaceable CR2032 battery 200-hour battery life. - Bluetooth low energy technology and ANT+ wireless data transfer. - AxCad -- no cadence magnet required. - Waterproof (IPX7 waterproof to 1 meter for 30 minutes). - SRAM Model ID: FC-XX-SLP-D1

Every innovation in Quarq's DZero platform represented the 10+ years of Quarq's advances in power meter technology. This same platform is now combined with XX1 Eagle DUB CARBON TUNED crankset—lightest, stiffest, and strongest to date, and X-SYNC 2 chainring—providing significantly quieter performance with better mud clearing and extraordinary durability. Ready to power every ride. - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero: automatically checks and recalibrates your power meter as you ride (no need to manually calibrate) - AxCad: no cadence magnet required - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy: within 1.5%, measuring both legs

Enjoy the ultimate advantage of freedom and adventure that Eagle provides combined with the Quarq power meter platform that delivers on accuracy and reliability. The SRAM Eagle XX1 power meter is built to pair with the SRAM Eagle drivetrains, providing a significantly quieter performance and extraordinary durability. Take it on the dirtiest, gnarliest trails while maintaining confidence in your cycling components. You came to perform; the Eagle XX1 power meter will perform with you. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather or trail condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh environments do not hold you back, then you need a product capable of rising to the occasion. The Eagle XX1 power meter is designed to be rough-and-tumble tough. Train harder, ride faster and unlock your ultimate potential. The Eagle XX1 power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. The Eagle XX1 also features Bluetooth low energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Bolt Circle Diameter (BCD): 104 BCD - Chainline: 52.0mm - BB Spindle Interface: DUB - Power Meter Type: ANT+ and BLE - Crank Arms/Chainrings not included

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DZero DUB is built with broad compatibility and will work with most 10 speed and 11 speed chainrings. Build the power meter that best fits your bike; choose between 110 BCD or 130 BCD power meter spider, the crank length to fit you, and the compatible SRAM DUB bottom bracket for your bike.

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz is the first-of-its-kind tire pressure sensor for riders of gravel bikes and road bikes, taking the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Designed for road and gravel riders. - Personalized tire recommendations in the smartphone app for iOS and Android. - Data reported with +/- 2% accuracy at .1 PSI resolution. - Broadly compatible with tires that use a removable Presta-style valve core. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating. - Box includes valve-core removal tool for installation.

Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.

Spare hose kit for Quarq's ShockWiz automated suspension tuning device. - Contains one of each hose type and four zip ties.

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

- Pakyak auxiliary battery holder to mount Pakyak auxiliary battery inside the storage box.

Lightweight, rugged CNC machined aluminum aero bicycle mount. Simple, reliable single-pivot 31.8 bar clamp. Secondary adjustable swivel provides perfect device positioning. Compatible with Lezyne X-Lock mount GPS cycling computers. Extra-secure and replaceable Composite Matrix X-Lock insert. Refined aluminum design with classic Lezyne styling. All stainless steel hardware. Perfect for the cyclist looking to streamline his or her cockpit with a beautifully stealth anodized black GPS computer mount. - Weight: 37g

Replacement GPS mount insert for the Direct X-Lock Mount System and the Alloy CNC Forward Mount.

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

Utilizing the ultimate in cycling GPS technology, this is a must have device for serious riders. It has a large, 2.7-inch 240x400 high-resolution screen with the option of vertical or horizontal viewing. - Pairs with Bluetooth Smart or ANT+ enabled power meters, heart rate monitors and speed/cadence sensors, in addition to compatible electronic drivetrains - When paired with an iOS or Android handheld through the free Lezyne Ally V2 app, the device provides turn-by-turn navigation and phone notifications (incoming calls, texts and message app notifications) - Live tracking (Lezyne Track) can be activated in the app to let friends and family follow rides in real-time - Super accurate, advanced data recording system combines GPS plus Glonass satellites and has a barometer and accelerometer for added accuracy - Battery runtime of up to 48 hours - Durable, composite construction - Intuitive four button operation - Micro USB rechargeable

Super-compact and lightweight magnet-less cycling cadence sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to a crankarm. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Super-compact and lightweight magnet-less cycling speed sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to most hubs. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Lezyne's Smart Energy Caddy is a lightweight, semi-rigid, top-tube-mounted smart phone caddy made from molded EVA foam with a durable woven nylon cover. Its clamshell pod design opens to provide easy access, and a mesh divider helps keep items in place. The Smart Energy Caddy's smart phone pocket holds any popular 4-5" phone model, and features a clear touch screen-compatible panel for full control of your phone. Three Velcro straps attach your caddy to your bike's top tube.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Garmin computers including Garmin 1040 - CNC machined 6016-T6 aluminum - Weight: 41g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

At 32 Grams the Race Mount is 33% lighter than the “standard” Wahoo Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.

The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Garmin cycling computers - Multi-mount positions - Garmin approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8" Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- CNC machined 6016-T6 aluminum platform, injection molded copolymer interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits 31.8mm handlebars - Weight: 38g - Lifetime guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. - Far and away more advanced than the plastic options on the market - Boost Stem Mount is specifically designed to fit atop the shortest stems on the market today - The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc - The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system - Compatibility: Wahoo ELEMNT, Wahoo Roam, Wahoo Bolt, Wahoo MINI - CNC-machined aluminum for low weight and strength - Made in the USA with a lifetime warranty - Stem mount that is for short, steep stem angles boosting the computer up above by 1cm

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Wahoo computers including Wahoo Roam - CNC machined 6016-T6 aluminum - Weight: 54g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

- CNC Machined Aluminum - Combo Compatible (580 Add-On sold separately) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight: 47g - Mount Type: Clamp 31.8mm - Mount Weight: 47g Compatibly: - WAHOO BOLT and MINI (ROAM users choose MAX XL K13-4605) - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)