Lighting

Replacement Part – Universal Tail Light Bracket - Fits all current tail lights with removable bracket except UTL-4bk - Long silicone strap allows endless mounting options - No tools needed - Not compatible with: TST-70, TST-100, TST-150 & TBT-50R

Coming up with new ways to make you safer on the road is a top priority at Serfas. Their unique “BLAST” Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10 minute runtime in that specific mode so you'll know when you need to recharge to be seen. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.* - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - “Blast” Audible Warning System Alerts Rider Of Low Battery - Design Easily Fits Aero Applications - Low Flash Lasts Up To 14.5 hours - Extra Long Mounting Straps For Endless Mounting Options Specs: - Solids Modes: High (100 Lumens): 2 hrs & Low (20 Lumens): 7.75 hrs - Flash Modes: High (100 Lumens): 3.5 hrs & Low (20 Lumens): 14.5 hrs - Weight: 48 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

Clip mount compatible with Magicshine SEEMEE 60, 100, 180 and 200 bike tail lights. Allowing the red tail light to be clipped onto backpacks, saddle bags, coats or belts.

SADDLE MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including a saddle mount used with seat rails.

SEEMEE SEATPOST MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including an adjustable silicon seat-post mount.

Extension Cable - Length: 100cm - Temperature: -20 - 60 degrees - Extension Cable for MONTEER 3500/900s/902s/900

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series

GoPro/Garmin helmet and head mount with straps, compatible with GoPro action cameras, bike lights, etc. GoPro base piece with an additional.GoPro to Garmin adapteron top for compatibility with all Garmin quarter turn style devices. Included are rigid helmet straps and stretchy head bands for head mounting.

SEEMEE 60 is a bike taillight with high powered COB red LED light source, the max output is 60 lumens, and is capable of 180 degrees of visibility   - SMART BRAKE SENSOR LED BIKE REAR LIGHT--Built in sensor will activate the brake light feature when it detects a sudden change in motion pattern, and blinks in a series of super fast flashes at 60 lumens. If no vibration is detected in 60 seconds, SEEMEE60 enters into a dormant mode to save energy and is re-activated upon any movements. - USB RECHARGEABLE BIKE BRAKE LIGHT-- It is rechargeable via Micro USB. A full charge will take 1.5 to 2 hours under 5V/500mA, Charging light will turn from red to green indicating its built in Lithium battery has been fully recharged. - QUICK INSTAILL--Installation and removal of the taillight is super quick and easy, rotate 90 degrees to install and rotate 90 degrees back to remove. - WATERPROOF OF IPX6--Anodized aluminum surface crafted seamlessly around the red led surface allows the SEEMEE60 to be completely waterproof with an IPX6 rating. - MULTIPLE MODES--3 brightness levels, a constant mode and 2 flash modes can be used in any combo. - Size: 41x33x23mm. - Weight: 34g.

BREAKING THROUGH DESIGN CONCEPTION, BRINGS YOU REAL 360° VISIBILITY. POWERFUL LIGHT OUTPUT, LET YOU BE SEEN DAY AND NIGHT. SMART MODES SETTINGS, MAKE IT ALL HANDS FREE. - 360° Tracing light design - Smart motion sensor - Sensitive ambient light sensor - Low power mode - Smart battery indicator - IPX6 waterproof rate

ME 1000, designed specifically for e-bike riders, is connected and powered directly by the output of the e-bike motor (Shimano, Bosch, Broser, Yamaha). Requires cable dependent on the motor system (sold separately). - Anti-Glare Lens. - Daytime Running Light . - Ambient Light Sensor. - Lumen: 1000 - Waterproof: IPX 6 - Application: E-Bike; Road, Off-Road. - Aluminum alloy case.

Magicshine New RN 3000 is a powerful bicycle light that utilizes two 21700 integrated batteries with 10,000mAh super high capacity. - Features the ability to lock the light by hold on the button for 5s when not using. - 3000 lumens max output - Beam Distance : 250 M - Battery: 3.6V 10000 mAh - Charging: USB-C fast charging and discharging - Waterproof: IPX 6 - Runtime: 1.5-23 H - Application: Urban, Road, Off-Road

Rear LED adapter for "D-Shaped" or flat seatposts found on select bicycles from manufacturers such as BMC, Giant and Specialized. Provides a stable, low-profile mounting surface for compatible LED lights. Compatible LEDs: - Laser Drive Rear - Strip Drive PRO Rear - KTV PRO Smart Rear - Strip Drive Rear STVZO - KTV PRO Rear - KTV Drive Rear STVZO - KTV Drive Rear

End Plug For Femto USB and Stvzo Femto USB Rear

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.

Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Specs - Max Lumens: 200 - Weight: 47.5g - Max Runtime: 20 hours - Recharge Time: 2:15

The Stick Drive is an incredibly thin and lightweight rear bike light equipped with eight super bright LED emitters. Its minimalistic design is optimized for versatility and ease of use. A simple o-ring securely straps it to a bicycle seatpost, and an innovative magnetic attachment separates the light from the mount for quick charging accessibility. It’s equipped with an integrated USB stick for cable-free charging, providing up to an impressive 23 hours of runtime. The Wide Angle Optics lens creates up to 270° of visibility, and the light outputs up to 30 lumens—this includes a disruptive Daytime Flash feature among its seven modes. With its narrow design and compact mount, the Stick Drive is the perfect taillight for maintaining aerodynamics and also attaching to seatposts with minimal space—like a dropper post. Designed and produced in-house, the Stick Drive is engineered for long-lasting durability and built to be highly water resistant. - Max 30 lumens - USB Rechargeable and magnetic clip-on mount - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Slim design, lightweight and durable - Magnetic clip-in mount - IPX7 water resistant

The Zecto Drive 250+ Front is a low-profile, high-visibility light with six ultra-bright LEDs that offer up to 250 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 250+ Front offers a maximum runtime of up to 40 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. - Max 250 lumens / 40-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

Compact, aero-post compatible safety light with Smart Connect compatibility. Smart Connect allows for customization and/or control of the output modes through the Lezyne LED Ally phone app, and it can link with compatible Lezyne LED front lights. Its co-molded construction is super-light, yet durable and has an IPX7 waterproof rating. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive Pro Rear provides up to 75 lumens (Daytime Flash) and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging for up to 19.5 hours of runtime. Specs - Max Lumens: 75 - Weight: 45g - Max Runtime: 19:30 hours - Recharge Time: 2:15 hours

The Strip Drive Front is a highly versatile LED cycling light offering up to 400 lumens. It features a lightweight and waterproof design with a durable co-molded lens/body construction. Its unique aero- and round-bar-compatible backside can mount to many odd shapes and sizes. It has an enhanced lens with built-in side visibility and five high-output LEDs. An integrated, cable-free USB stick makes charging simple, and the Strip Drive Front can run for up to 21.5 hours on a single charge. Specs - Max Lumens: 400 - Weight: 69g - Max Runtime: 21:30 hours - Recharge Time: 2 hours

- Detects when you are braking to emit a bright light alerting others you're stopping - Max 80 lumens / 11 hour runtime in Economy mode - Highly disruptive Daytime Flash mode - Accelerometer automatically turns light on and off - Intelligent Power Indicator displays battery life - Patented 2-in-1 clip and strap mounting system

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

The LED Laser Drive rear light enhances nighttime safety by projecting "lanes" on the road behind you. Two laser lines establish your presence by creating a lane that shows motorists where you are and where you're headed. Two solid modes and five flashing modes ensure you're always seen, and recharges are made convenient through USB. Silicone rubber mounting strap included.